公司产品

HYDRA-CELL G-20


F20 Series (US)

F20 - Flow Capacities @1000    Psi (69 Bar)

Model

rpm

gpm

l/min

F20-B

1750

0.31

1.17

F20-E

1750

0.71

2.69

F20-G

1750

0.20

0.76

F20-S

1750

0.56

2.12

F20-X

1750

1.01

3.82

F20 - Delivery @1000 Psi (69    Bar)


Model

gal/rev

liters/rev


F20-B

0.0002

0.0007


F20-E

0.0004

0.0015


F20-G

0.0001

0.0004


F20-S

0.0003

0.0012


F20-X

0.0006

0.0022







 

F20 - Other Specifications



Maximum Discharge Pressure


Metallic Heads:

F20 to 1000 psi (69 bar)


F21 to 1500 psi (103 bar)


F22 to 1500 psi (103 bar)

Non-metallic Heads:

250 psi (17 bar) Polypropylene


350 psi (24 bar) PVDF

Maximum Inlet Pressure

250 psi (17 bar)

Maximum Operating Temperature


Metallic Heads:

250˚F (121˚C) - Consult factory for   correct component selection for temperatures from 160 ̊F (71 ̊C) to 250 ̊F   (121 ̊C).

Non-metallic Heads:

140˚F (60˚C)

Maximum Solids Size

200 microns

Inlet Port

1/2 inch NPT

Discharge Port

3/8 inch NPT

Shaft Diameter

F20: 3/4 inch (19 mm) hollow shaft


F21 & F22: 3/4 inch (19 mm)

Shaft Rotation

Reverse (bi-directional)

Bearings

Precision ball bearings

Oil Capacity

0.125 US quart (0.12 liters)

Weight


Metallic Heads:

12 lbs. (5.5 kg)

Non-metallic Heads:

90 lbs. (40.9 kg)9 lbs. (4.1 kg)

G20 Series (Metric)

G20 - Flow Capacities @ 69 Bar    (1000 Psi) 4-Pole Motor @ 50 Hz

Model

rpm

gpm

l/min

G20-B

1450

0.27

1.03

G20-E

1450

0.60

2.29

G20-G

1450

0.16

0.63

G20-S

1450

0.45

1.72

G20-X

1450

0.83

3.14

G20 - Flow Capacities @ 69 Bar    (1000 Psi) 6-Pole Motor @ 50 Hz

Model

rpm

gpm

l/min

G20-B

960

0.18

0.68

G20-E

960

0.40

1.51

G20-G

960

0.10

0.41

G20-S

960

0.30

1.14

G20-X

960

0.55

2.08

 

G20 - Delivery @ 69 Bar (1000    Psi)


Model

gal/rev

liters/rev


G25-E

0.0174

0.0660


G25-I

0.0103

0.0389


G25-S

0.0141

0.0535


G25-X

0.0190

0.0721


G20 - Other Specifications



Maximum Discharge Pressure


Metallic Heads:

G20 to 24 bar (350 psi)


G21 to 103 bar (1500 psi)


G22 to 103 bar (1500 psi)

Non-metallic Heads:

17 bar (250 psi) Polypropylene


24 bar (350 psi) PVDF

Maximum Inlet Pressure

17 bar (250 psi)

Maximum Operating Temperature


Metallic Heads:

121 ̊C (250 ̊F) - Consult factory for   correct component selection for temperatures from 71 ̊C (160 ̊F) to 121 ̊C   (250 ̊F).

Non-metallic Heads:

60 ̊C (140 ̊F)

Maximum Solids Size

200 microns

Inlet Port

1/2 inch BSPT


1/2 inch NPT

Discharge Port

3/8 inch BSPT


3/8 inch NPT

Shaft Diameter

G20: 19 mm hollow shaft


G21 & G22: 19 mm (3/4 inch)

Shaft Rotation

Reverse (bi-directional)

Bearings

Precision ball bearings

Oil Capacity

0.12 liters (0.125 US quart)

Weight


Metallic Heads:

5.5 kg (12 lbs.)

Non-metallic Heads:

4.1 kg (9 lbs.)